Fuel Line Clamp
90467-100A1-00
This is an exact reproduction of the original factory part (90467-100A1-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fuel line clamp Fits all 5/16ths fuel lines**Sold individually**
Seat Pan Clip
Oil Tank Clip
Instrument Clip
90468-10050
This is an exact reproduction of the original factory part (90468-10050) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Seat Pan, Oil Tank & Instrument Clip Fits all models from 1962-2001
Inline Fuel Filter
This is an exact reproduction of the original factory part (FF) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Inline Fuel Filter Fits All Models
Steering Stem Dust Seal
164-23462-00
This is an exact reproduction of the original factory part (164-23462-00) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Steering Stem Dust Seal Fits all 1967-2016 Models
Tail Light Damper
214-84553-01
This is an exact reproduction of the original factory part (214-84553-01) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits all models from 1971-1973
Wire Harness Grommet
214-84153-00
This is an exact reproduction of the original factory part (214-84553-01) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits most models
Neutral Switch Cover
136-82540-00-00
This is an exact reproduction of the original factory part (136-82540-00-00) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits the following models:
1964-1994 Models with Neutral/Reverse Safety Switch
Oil Tank Grommet
90480-16116-00
This is an exact reproduction of the original factory part (136-82540-00-00) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits the following models:
1969-1971 AT/CT Models
Rubber Seat Pan Edge Trim
SPT
This is an exact reproduction of the original factory part (MXHG) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Rubber Seat Pan Edge Trim
Spacer Flange
146-25115-00
This is an exact reproduction of the original factory part (146-25115-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Spacer Flange Fits All 1969 -73 AT/CT Models and
1974-76 DT 125/175 Models
Oil Tank Bolt
97017-06025-00
97011-06025-00
This is an exact reproduction of the original factory part (97017-06025-00 & 97011-06025-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits all 1969-1973 AT and CT models
Contact Points
132-81221-10
This is an exact reproduction of the original factory part (132-81221-10) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Contact Points fits the following:
1969-1971 AT-1 & MX
1972-1973 AT2/3
Contact Points
207-81321-10
This is an exact reproduction of the original factory part (207-81321-10) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Contact Points fits the following:
1969-1971 CT1
1971-1972 HT1/JT1-2
1972-1973 LT2/3
1973-1974 GT80
Steering Stem Bearing Kit
STR-BRG KIT
This is an exact reproduction of the original factory part (97017-06025-00 & 97011-06025-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits all 1969-1973 AT and CT models
Cover, Reflector Stay
Sold as A Pair
256-23162-60-00
This is an exact reproduction of the original factory part (256-23162-60-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits the following models:
SOLD AS A PAIR
1970 G6S, R5, XS1
1971 G6SB, R5B, XS1B
1972 CS5, DS7, DT2, G7S, LS2, LT2, LT2MF, R5C, RT2,
XS2, AT3/CT3
1973 DT3, LT3, LT3MX, RT3, TX650, AT3_CT3
Seat Pan Damper Pad
set of 4
214-24724-00
This is an exact reproduction of the original factory part (214-24724-00) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits most of the following Years:
1968-1994 sold as a set of 4
Clutch Plates
336-16324-00-00
This is an exact reproduction of the original factory part (336-16324-00-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
These Clutch Plates fit all 1964-2003 YA, YL, YC, AS, AT, CS, CT, HS, HT, LS, LT MODELS 100, 125, 175 CC
Throttle Cable
214-26312-00
This is an exact reproduction of the original factory part (214-26312-00) produced by Yamaha in the traditional yamaha grey color. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits all 1968-1973 DT and RT models
Torsion Spring 90508-26136
This is an exact reproduction of the original factory part (90508-26136) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Torsion Spring Fits all models from 1966-1980
Friction Plate
5y1-16331-01-00
This is an exact reproduction of the original factory part (5y1-16331-01-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
These Friction Plates fit all 1968-73 DT/RT & MX Models
1974-76 DT250/360/400 models
Friction Plate
3HA-16321-00-00
This is an exact reproduction of the original factory part (3HA-16321-00-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
These Friction Plates fit all 1964-2003 YA, YL, YC, AS, AT, CS, CT, HS, HT, LS, LT MODELS 100,125, 175 CC
2 Piece Gas Cap Rebuild Kit
437-24612-00
This is an exact reproduction of the original factory part (437-24612-00 & 437-24616-00) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits the following models:
1974-1975 DT100
DT125 & DT175
DT250
DT360
1978-1981 XS1100 Models
Fits DT125 & DT175
Standard Enduro Hand Grips
Pair
This is an exact reproduction of the original factory part (EHG) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Standard Enduro Hand Grips
MX Hand Grips
MXHG
This is an exact reproduction of the original factory part (MXHG) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
MX Hand Grips
Brake Lever and Clutch Lever 137-83912-02-38 - 2n3-83922-00
This is an exact reproduction of the original factory part (137-83912-02-38---2n3-83922-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fits JT models from 1970-1971, GT80 models from 1973-1980, DT100 models from 1977-1983
And many others.
Clutch Actuator Worm Gear
214-16340-00
This is an exact reproduction of the original factory part (214-16340-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Clutch Actuator Worm Gear Fits all 1968-1973 DT/RT models. This Gear is Solid Brass
Fork Boots
278-23144-50-00
This is an exact reproduction of the original factory part (278-23144-50-00) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Fork Boots
sold as a pair
Plastic Side Covers 438-21711-00 - 438-21721-00
This is an exact reproduction of the original factory part (438-21711-00-&-438-21721-00) produced by Yamaha. The rubber compounds used far exceed the original in both durability and performance. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
*SOLD AS A PAIR*
Plastic Side Covers Fits all DT250, DT360 & DT400 models from years 1974-1976
Flip Top Gas Cap
308-24610-00
This is an exact reproduction of the original factory part (308-24610-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Flip Top Gas Cap Fits all 1972-1973 models.
Buddy Rack RO18
444-24810-00
This is an exact reproduction of the original factory part (444-24810-00) produced by Yamaha. The parts we produce have all been obsolete for many years and are generally unavailable. When you can find them, they are already many years old.
Buddy rack RO18 fits all AT/CT from 1969-1971 and DT125 from 1974-1976